Chlorine dioxide
The Illustrated Guide to Hot and Cold Water Services (BG 33/2014), written by Reginald Brown and published by BSRIA in 2014, states: ‘Chlorine dioxide (ClO2) is created from the reaction of hazardous precursor chemicals that must be stored on site. It is usually dosed into the cold water distribution system as it is less soluble in hot water. The risk of pipework corrosion may be increased immediately downstream of the injection point. At low concentration (<0.5 ppm), ClO2 is effective against legionella and other bacteria. However, there are limits on the permissible level of total oxidants. These may include unreacted precursor chemicals and reaction byproducts.’
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Building Safety Newsletter from MHCLG.
An extraordinary record of steel engineering worldwide.
Households living near new pylons to save on bills.
ECA warns growth must not outpace grid capacity or skills.
The role of the client and decision making
CIOB response to built environment professions call for evidence.